How To Properly Break In A Subwoofer?

Are you excited about your new subwoofer? However, before getting it in full running mode, you must learn how to break in a subwoofer. Otherwise, the chances are high that you will not get to experience the best performance of your subs.

Moreover, breaking the subs properly also plays a big role in increasing the longevity of your subwoofers. Pretty cool, right?

You will be surprised to know many people without knowing its importance and how to do it correctly—get miss out on experiencing one of the best feelings that a top-notch subwoofer can give them. Hence, if you don’t want to fall under this list, go through this article with patience.

Can’t wait anymore? Similarly, we can’t wait to tell you.

Let’s get started:

How To Break In A Subwoofer?

Breaking in subs is not rocket science. Instead, if you know the correct method of doing it, it will become a piece of cake for you. It’s just you need to know the exact step-by-step process.

Check Also: Subwoofer vs. Speaker

Don’t worry; we are to guide you with our expert tips. So you can benefit yourself and enjoy every bit produced by your subwoofers.

However, before heading directly to the steps, there are some essential tools you need to do the following break properly. Make sure to keep the below list of things in hand before going ahead with the process to avoid having future troubles:

Now that you know what equipment you need, let’s know how to break in a subwoofer in the correct method to experience the ultimate satisfaction:

Step 1: Check The Connections

The first and foremost job of yours is definitely checking the connections. After all, the main amplifier to the ground source will either give no sound or a hazy and unclear sound without a loose connection. Hence, always check the connection properly before starting the process.

Step 2: Put On A Deep Bass Songs

After setting the connections, your next task is playing deep bass songs. No matter how much you are in love with soft and classical songs, you should still go with deep bass songs here. Otherwise, it won’t be easy to understand whether the subwoofer is working at its full pace or not.

Hence, choose a deep bass song that has constancy, rhythmicity and repetitive transients.

Step 3: Run At A Moderate Level

This step is often overlooked, but it is also another important phase of the entire subwoofer break-in process. Therefore, it is more than necessary to do this method properly.

Here, the work is simple. Once the system is ready, you just need to run with your subwoofer break-in period and play it in a moderate volume range for 15 minutes or more.

It will thus let the amp and the driver time to settle and warm up. As soon as the electric current begins flowing via the power suppliers, the esters and resins placed in the cristal suspension mechanisms will finally start to relax and show their true power. This process is quite similar to the breaking engine that is conducted in a new car.

Step 4: Time For Family Dinner Phase

Although it is the last step, it is one of the most crucial steps you must do carefully in a subwoofer break-in to make it a success.

By dinner phase refers to the aggressive break-in conducted before the subwoofers are set-up and dialed in. One of the interesting things about this dinner phase is you need to do the phase in 2 steps.

1st Dinner Phase

For the 1st phase, tune the volume to its second-highest volume. Adjust it to the moderate level if you have sensitive speakers and turn the REL up.

For the crossover up, please set it to 12 o’clock and the main speakers at the soft level to allow more energy passage via the subwoofers instead of the speakers.

Note: Keep a difference of 4 dB before and after the set-up and the dial-in settings.

2nd Dinner Phase

Now for the final stage, you need to keep the subs performing for a long 10 to 12 hours at a low level to complete the break run-in process.

FAQ: How To Break In A Subwoofer?​

If you are in any kind of dilemmas regarding subwoofer break in, then have a quick go through the below queries to clear all your confusions:

What Does A Subwoofer Do?

Subwoofers are a kind of speaker used in addition to the main speakers to boost up any low frequencies music to another level. Such as bass guitars, movie sound, deep noises, etc., They are extremely easy to set and famous for home theatres and car stereos usage.

How Long To Break In Subwoofer?

Although 10-12 hours are enough for most low and mid-range subwoofer break-ins, the ideal is to do 20 to 24 hours for hardcore subs.

How Long Do Subwoofers Last?

Generally, there is no precise answer regarding the longevity of subwoofers. It basically varies from sobs to subs depending on their brand, model, power, and other factors.

However, to give you a definite estimation, high quality can last for more than 20 years, giving the same experience and service.

Do Subwoofers Need To Be Broken In?

Of course, they must be broken in that too properly to experience the best performance and top-notch sound quality your subs can produce.   

How Hot Can A Subwoofer Get?

The threshold point of an amplifier of a subwoofer in terms of temperature tolerance point is 90 C. Hence when it reaches this temperature, it will ultimately get turned off.

So you don’t have to worry about anything. Moreover, you may often notice a smell coming from the subs when it surpasses their temperature threshold level.

Closing Notes

Many people think that subwoofer break-ins are unnecessary and don’t play any role in the performance of subs. Well, it is a huge misconception among people.

Instead, they have a huge hand in improving the sound quality of the subwoofers. So why shouldn’t you do it, especially when the process is extremely easy? You need to know the exact function of doing it.

Hopefully, by going through the article, you now have developed a clear concept regarding “how to break in a subwoofer.” Just follow all the above steps as instructed to enjoy and groove to every tune of your subs.

Leave a Reply

Your email address will not be published. Required fields are marked *